Interdeck Polyurethane Non-slip deck coating
PRODUCT DESCRIPTION Interdeck provides an excellent slip resistant finish. It contains a fine aggregate and will apply easily on all substrates.
* Low sheen finish prevents dazzling reflected sunlight off decks
* Easy application
* Available in a range of colours
The tough polyurethane resin protects decks against everyday wear and tear.
PRODUCT INFORMATION Colour Finish Low sheen Specific Gravity 1.4 Volume Solids 54% Typical Shelf Life 2 yrs VOC (As Supplied) 357 g/lt Unit Size 750 ml DRYING/OVERCOATING INFORMATION Drying 5°C 15°C 23°C 35°C Touch Dry [ISO] 5hrs 4hrs 3hrs 2hrs Dry To Walk On 4days 3days 2days 1days Overcoating Substrate Temperature 5°C 15°C 23°C 35°C Overcoated By Min Max Min Max Min Max Min Max Interdeck 24hrs 4days 20hrs 3days 16hrs 2days 12hrs 1days APPLICATION AND USE Preparation PREVIOUSLY PAINTED SURFACES:
In Good Condition: Wash down with Super Cleaner, rinse with fresh water and allow to dry. Abrade with 280-320 grade (grit) paper.
In Poor Condition: Remove all previous coatings and prime the substrate.
PRIMING: All preparation for bare substrates is covered on the appropriate primer datasheet.
BARE WOOD: Prime with Yacht Primer or UCP.
STEEL: Prime with Yacht Primer or Interprotect.
ALUMINIUM: Prime with Etch Primer followed by either Yacht Primer or Interprotect.
GRP: Wash down with Super Cleaner, rinse with fresh water and allow to dry. Abrade with 180-220 grade paper. No priming necessary.
AGED/WEATHERED GELCOATS: Due to the potentially porous nature of aged/weathered gelcoats the risk of solvent/moisture entrapment after painting is much higher than when gelcoat is new. As a result this entrapment could lead to blistering of the paint film. To reduce the risk of paint film blistering it is recommended that 3 coats of Interprotect are applied to seal the gelcoat. Interprotect must be overcoated with Perfection Undercoat prior to topcoat application.
ALL SUBSTRATES: If any filling is required use the appropriate product from the Interfill range.
Method Sand the primer with 180-220 grade wet or dry paper. Remove dust with a dust wipe. Apply 1-2 coats. Hints Mixing Stir well before use.
Thinner YTA800 Thinners No.1
Cleaner YTA800 Thinners No.1
Ventilation and Humidity Control Apply in dry, well ventilated conditions.
Other For best results either stipple by brush or use a mohair roller.
Some Important Points Product temperature should be minimum 10°C and maximum 30°C. Ambient temperature should be minimum 5°C/41°F and maximum 35°C/95°F. Substrate temperature should be minimum 5°C/41°F and maximum 35°C/95°F. Compatibility/Substrates Suitable for all substrates and filled surfaces. Not suitable for permanently immersed surfaces. Do not clean with highly alkaline cleaners. Number of Coats 1-2 Coverage (Theoretical) - 9.50 (m²/lt) Recommended DFT 50 microns dry Recommended WFT 93 microns wet Application Methods Brush, Roller TRANSPORTATION,STORAGE AND SAFETY INFORMATION
Delivery to UK Mainland only - otherwise contact us for a delivery quotation.
- Delivery info
Where products are in stock you should expect delivery within 3 working days. For next day delivery the cut-off time is 2pm. Orders received after 2pm will be despatched the following day for delivery the day after.
Delivery for Chart Art is 10 working days.
Returns during the Christmas period. We will accept the return of any product (excluding custom made products such as rope, rigging, sails or canvas work, or audio or video recordings or computer software which has been unsealed by you) up to January 31 2015. Please download our returns form (PDF).
If goods are not in stock and delivery is going to be longer than 30 days Storrar Marine Ltd will contact you to discuss options. Storrar Marine Ltd will not be liable for any loss or damage suffered by you through any reasonable or unavoidable delay in delivery.
We charge strictly at cost for delivery, however for orders over £100, delivery is free to UK addresses.* Free delivery will be applied to the cart at the checkout payment stage (if applicable).
If delivery is to the UK mainland, excluding the Scottish Highlands, charges are
>1 <2 £6.99
>2 <10 £7.99
>10 <20 £9.99
>20 <30 £15.99
>30 <40 £39.99
Oversize items £59.99
*Free UK delivery is restricted to England, Wales and Lowland Scotland. It does not include Northern Scotland, or Islands or Northern Ireland. Restricted to maximum 30kg and 1.5m in length, it does not apply to bulky products; dinghies, outboards, or hazardous products; liferafts, or pyrotechnics (Flares). Free delivery is for a single complete shipment of an order.
Extra charges apply for next day deliveries and Saturday deliveries, and deliveries to Highlands, Islands and Northern Ireland. If you are fortunate enough to be in the Channel Islands, please use Jersey or Guernsey as the country to get the ex-VAT figures.
Small, but valuable items such as Electronic Charts are charged at the £6.99 rate as we usually send by courier so they can be tracked. Rolled up Admiralty charts are £4.99, but Admiralty folios are packed flat and too large to go by post and are £6.99.
Delivery charges may be changed without notice. Any overcharge of delivery cost will be refunded.
We cannot predict the cost to ship hazardous materials outside of UK. If your purchase includes a gas inflating lifejacket we can send it overseas only by first removing the gas bottle. You will have to find a local source to replace this bottle for the lifejacket to function. We cannot send re-arm kits overseas.
We cannot send other hazardous goods including liferafts, paint and antifouling overseas without first getting a special delivery quotation. After all these hurdles we put up, please do not be alarmed - if you need a liferaft delivered to the Baltic, the Mediterranean, the Caribbean, simply contact us for a quote. You can be confident our delivered price will still be better than local sourcing.
For delivery outside the EC, you must observe and comply with all applicable regulations and legislation, including obtaining all necessary customs, import or other permits to purchase goods from our site. You will be responsible for payment of any import duties and taxes. The importation or exportation of certain types of goods to you may be prohibited by certain national laws. Storrar Marine Ltd make no representation and accept no liability in respect of the export or import of the goods you purchase.
The majority of our deliveries need to be signed for, therefore we would recommend using a delivery address where somebody will be around to do this during normal working hours. ie your office or place of work.
Write Your Own Review