International Interprotect two-pack epoxy primer


Click on the thumbnail below to view large picture

Zoom Out
Zoom In

More Views

International Interprotect two-pack epoxy primer

Product overview

International logo

Interprotect is a quick drying, easy to apply two-pack epoxy primer for high performance protection on all rigid substrates.

Product ID: 4764

* Required Fields

Price From:

Regular Price: £38.74

Special Price £37.96

Price From:

Regular Price: £38.74

Special Price £37.96

Accepted payment methods

Sagepay Paypal


Delivery to UK Mainland only - otherwise contact us for a delivery quotation.

Ask any boatpainting professional and he'll tell you that you cannot 'work down' to a high quality finish - you have to 'work up' and that means care and attention to preparation of the surface prior to applying topcoats.

International's range of primers is designed to help you make this unseen but nevertheless vital area of maintenance as simple and efficient as possible. Care and attention in this area will maximise the performance of any topcoat and ultimately provide greater value for money in the longer term.

Interprotect® is a quick drying, easy to apply two-pack epoxy primer for high performance protection on all rigid substrates.

It's two-component application gives excellent anti-corrosive and abrasion resistance properties and it can be used equally above or below the waterline.

Coverage: 6m2/750ml 20.3m2/2.5lt

Quick drying, easy to apply epoxy primer for high performance protection.
* Excellent anticorrosive protection
* Antifouling tie-coat for use over epoxy primers
* Good abrasion resistance
Colour YPA400-White, YPA403-Grey
Finish Matt
Specific Gravity 1.4
Volume Solids 45% 
Mix Ratio 3:1 by volume , Converter/Curing Agent - YPA404
Typical Shelf Life 2 yrs
VOC (As Supplied) 464 g/lt
Unit Size 750 ml 2.5 Lt 5 Lt
  5°C 15°C 23°C 35°C
Touch Dry [ISO] 4hrs 2hrs 1hrs 30mins
Immersion 24hrs 18hrs 12hrs 8hrs
Pot Life 10hrs 5hrs 3hrs 2hrs


Substrate Temperature
  5°C 15°C 23°C 35°C
Overcoated By Min Max Min Max Min Max Min Max
B.F.A.      5hrs  9hrs        
Cruiser  10hrs  24hrs  5hrs  9hrs  3hrs  7hrs  1hrs  5hrs
Cruiser  10hrs  24hrs  5hrs  9hrs  3hrs  7hrs  1hrs  5hrs
Cruiser Eco/Cruiser Future  10hrs  24hrs  5hrs  9hrs  3hrs  7hrs  1hrs  5hrs
Cruiser Premium  10hrs  24hrs  5hrs  9hrs  3hrs  7hrs  1hrs  5hrs
Cruiser UNO  10hrs  24hrs  5hrs  9hrs  3hrs  7hrs  1hrs  5hrs
Fabi  10hrs  24hrs  5hrs  9hrs  3hrs  7hrs  1hrs  5hrs
Fabi Eco/Waterways Future  10hrs  24hrs  5hrs  9hrs  3hrs  7hrs  1hrs  5hrs
Fabi Skeppsmask / CT Kobber  10hrs  24hrs  5hrs  9hrs  3hrs  7hrs  1hrs  5hrs
Interfill 830      36hrs  3mths  24hrs  3mths  24hrs  3mths
Interprotect  10hrs  6mths  5hrs  6mths  3hrs  6mths  2hrs  6mths
Interspeed  10hrs  24hrs  5hrs  9hrs  3hrs  7hrs  1hrs  5hrs
Interspeed Aqua  10hrs  24hrs  5hrs  9hrs  3hrs  7hrs  1hrs  5hrs
Interspeed Kopervrij  10hrs  24hrs  5hrs  9hrs  3hrs  7hrs  1hrs  5hrs
Interspeed Ultra  10hrs  24hrs  5hrs  9hrs  3hrs  7hrs  1hrs  5hrs
Lago Racing II  10hrs  24hrs  5hrs  9hrs  3hrs  7hrs  1hrs  5hrs
Micron  10hrs  24hrs  5hrs  9hrs  3hrs  7hrs  1hrs  5hrs
Micron 55  10hrs  24hrs  5hrs  9hrs  3hrs  7hrs  1hrs  5hrs
Micron 66  10hrs  24hrs  5hrs  9hrs  3hrs  7hrs  1hrs  5hrs
Micron Eco/Micron Future  10hrs  24hrs  5hrs  9hrs  3hrs  7hrs  1hrs  5hrs
Micron Extra  10hrs  24hrs  5hrs  9hrs  3hrs  7hrs  1hrs  5hrs
Micron Kopervrij  10hrs  24hrs  5hrs  9hrs  3hrs  7hrs  1hrs  5hrs
Micron Optima  10hrs  24hrs  5hrs  9hrs  3hrs  7hrs  1hrs  5hrs
Micron WQ  10hrs  24hrs  5hrs  9hrs  3hrs  7hrs  1hrs  5hrs
Navigator  10hrs  24hrs  5hrs  9hrs  3hrs  7hrs  1hrs  5hrs
Perfection Undercoat  10hrs  5days  5hrs  3days  3hrs  2days  2hrs  1days
Polyurethane Basecoat  10hrs  5days  5hrs  3days  3hrs  2days  2hrs  1days
Prima  10hrs  24hrs  5hrs  9hrs  3hrs  7hrs  1hrs  5hrs
Trilux  10hrs  24hrs  5hrs  9hrs  3hrs  7hrs  1hrs  5hrs
Trilux (S)  10hrs  24hrs  5hrs  9hrs  3hrs  7hrs  1hrs  5hrs
Trilux 33  10hrs  24hrs  5hrs  9hrs  3hrs  7hrs  1hrs  5hrs
Trilux 33  10hrs  24hrs  5hrs  9hrs  3hrs  7hrs  1hrs  5hrs
Uni-Pro  10hrs  24hrs  5hrs  9hrs  3hrs  7hrs  1hrs  5hrs
Veridian Tie Coat  10hrs  24hrs  5hrs  9hrs  3hrs  7hrs  1hrs  5hrs
Watertite      36hrs  3mths  24hrs  3mths  24hrs  3mths
Waterways (Eire Only)  10hrs  24hrs  5hrs  9hrs  3hrs  7hrs  1hrs  5hrs
  Note:Overcoating times relate to Brush/Roller application. For other antifoulings, not specifically listed, use the Micron Extra overcoating times. If maximum overcoating time is exceeded, sand with 180-220 grade wet or dry paper.
Preparation STEEL: Degrease with solvent or Yacht Line Super Cleaner. Gritblast to Sa 2½ - near white metal surface. If gritblasting is not possible, grind the metal surface with 24-36 grit abrasive discs to a uniform, clean, bright metal surface with a 50-75 microns anchor pattern. Use angle grinder on small areas.
Above water:: Degrease with Super Cleaner. Pre-prime using Etch Primer. Alternatively, abrade with aluminium compatible paper or low pressure grit blast using aluminium oxide.
Below water:: Degrease AND abrade or grit blast.
ZINC/GALVANISED STEEL: Thoroughly degrease with Yacht Line Super Cleaner. Pre-prime using Etch Primer.
STAINLESS STEEL: Light gritblast to produce a profile of 50 microns prior to applying a thinned coat of Interprotect as a tie coat.
LEAD: Rub down with an emery cloth or power wire brush. Degrease with Super Cleaner. Pre-prime using Etch Primer.
BARE WOOD: Sand with 80-280 grade paper. Preserve, if required, with Intertox. Remove oil from oily woods eg teak, using Thinner No. 9. Change rags frequently.
Method If filling is required, use appropriate filler after the first coat of Interprotect has been applied. Before painting, remove any dust with a dust wipe. Apply the following number of coats: Steel/Aluminium/Alloy - Above 4, Below 5. Lead - 5, Wood - 3. When used as a tie coat over Interprime 820: 1 coat.
Hints Mixing Stir or shake individual components thoroughly. Add Curing Agent to the Base, stir and leave for 10 minutes to allow bubbles to disperse.
Thinner YTA061 Thinners No.7 GTA220
Cleaner Use GTA822 for equipment cleaning.
Other For maximum performance to be achieved, the curing temperature should be above 10°C/50°F.
Some Important Points Do not use below 5°C. Do not apply over conventional (one-pack) coatings. Do not apply when there is a chance of condensation forming on the substrate. Ambient temperature should be minimum 5°C/41°F and maximum 35°C/95°F. Product temperature should be minimum 10°C and maximum 35°C. Substrate temperature should be minimum 5°C/41°F and maximum 35°C/95°F.
Compatibility/Substrates Interprotect can be used on all suitably prepared substrates and epoxy primers. Suitable for stainless steel trim tabs and stern drive gear. It should not be used over any one pack products. Not suitable for use on bronze or mixed alloy propellers.
Number of Coats 1-5 by brush/roller depending on substrate and use
Coverage (Theoretical) - 9.10 (m²/lt) by brush
  (Practical) - 8.10 (m²/lt) by brush
Recommended DFT 50 microns dry by brush
Recommended WFT 110 microns wet by brush
Application Methods Brush, Roller
Exposure to air and extremes of temperature should be avoided. For the full shelf life of Interprotect to be realised ensure that between use the container is firmly closed and the temperature is between 5°C/40°F and 35°C/95°F. Keep out of direct sunlight.
Interprotect should be kept in securely closed containers during transport and storage.
Safety GENERAL: Read the label safety section for Health and Safety Information, also available from our Technical Help Line.

DISPOSAL: Do not discard tins or pour paint into water courses, use the facilities provided. It is best to allow paints to harden before disposal.
Remainders of Interprotect cannot be disposed of through the municipal waste route or dumped without permit. Disposal of remainders must be arranged for in consultation with the authorities.
Delivery info

Where products are in stock you should expect delivery within 3 working days. For next day delivery the cut-off time is 2pm. Orders received after 2pm will be despatched the following day for delivery the day after.

Delivery for Chart Art is 10 working days.

Returns during the Christmas period. We will accept the return of any product (excluding custom made products such as rope, rigging, sails or canvas work, or audio or video recordings or computer software which has been unsealed by you) up to January 31 2015. Please download our returns form (PDF).

If goods are not in stock and delivery is going to be longer than 30 days Storrar Marine Ltd will contact you to discuss options. Storrar Marine Ltd will not be liable for any loss or damage suffered by you through any reasonable or unavoidable delay in delivery.

We charge strictly at cost for delivery, however for orders over £100, delivery is free to UK addresses.* Free delivery will be applied to the cart at the checkout payment stage (if applicable).

If delivery is to the UK mainland, excluding the Scottish Highlands, charges are
<1kg £4.99
>1 <2 £6.99
>2 <10 £7.99
>10 <20 £9.99
>20 <30 £15.99
>30 <40 £39.99
Oversize items £59.99
Flares £18.99

*Free UK delivery is restricted to England, Wales and Lowland Scotland. It does not include Northern Scotland, or Islands or Northern Ireland. Restricted to maximum 30kg and 1.5m in length, it does not apply to bulky products; dinghies, outboards, or hazardous products; liferafts, or pyrotechnics (Flares). Free delivery is for a single complete shipment of an order.

Extra charges apply for next day deliveries and Saturday deliveries, and deliveries to Highlands, Islands and Northern Ireland. If you are fortunate enough to be in the Channel Islands, please use Jersey or Guernsey as the country to get the ex-VAT figures.

Small, but valuable items such as Electronic Charts are charged at the £6.99 rate as we usually send by courier so they can be tracked. Rolled up Admiralty charts are £4.99, but Admiralty folios are packed flat and too large to go by post and are £6.99.

Delivery charges may be changed without notice. Any overcharge of delivery cost will be refunded.

We cannot predict the cost to ship hazardous materials outside of UK. If your purchase includes a gas inflating lifejacket we can send it overseas only by first removing the gas bottle. You will have to find a local source to replace this bottle for the lifejacket to function. We cannot send re-arm kits overseas.

We cannot send other hazardous goods including liferafts, paint and antifouling overseas without first getting a special delivery quotation. After all these hurdles we put up, please do not be alarmed - if you need a liferaft delivered to the Baltic, the Mediterranean, the Caribbean, simply contact us for a quote. You can be confident our delivered price will still be better than local sourcing.

For delivery outside the EC, you must observe and comply with all applicable regulations and legislation, including obtaining all necessary customs, import or other permits to purchase goods from our site. You will be responsible for payment of any import duties and taxes. The importation or exportation of certain types of goods to you may be prohibited by certain national laws. Storrar Marine Ltd make no representation and accept no liability in respect of the export or import of the goods you purchase. 

The majority of our deliveries need to be signed for, therefore we would recommend using a delivery address where somebody will be around to do this during normal working hours. ie your office or place of work.


Be the first to review this product

Write Your Own Review

You're reviewing: International Interprotect two-pack epoxy primer