West System Six10 Epoxy Adhesive 190ml

West System Six10 Epoxy Adhesive 190ml

Click on the thumbnail below to view large picture

Zoom Out
Zoom In

More Views

West System Six10 Epoxy Adhesive 190ml

Product overview

logoNEW Six10® Thickened Epoxy Adhesive - A 2-part epoxy in a tube that delivers point-and-shoot convenience

Product ID: 34803

Regular Price: £22.79

Special Price £22.45

Accepted payment methods

Sagepay Paypal


Measuring and working with epoxy resin and hardener just got easier.  WEST SYSTEM® now offers the permanent, waterproof, gap-filling and gluing performance of their two-part epoxies in a convenient point-and-shoot package.  This new Six10 Thickened Epoxy Adhesive meters the proper ratio of epoxy resin and hardener from a multi-chambered tube that fits in any standard caulking gun.  The pre-thickened components travel through a static mixer where they are fully blended before being dispensed in a smooth, workable bead.

This gap-filling structural epoxy bonds tenaciously to wood, metals, fiberglass and concrete.  The mixture will not run or sag.  Unlike other ready-to-dispense adhesives such as methyl methacrylates and polyurethane glues, Six10's physical properties are ideal for stitch and glue boat construction, fiberglass laminate repair and general marine bonding.  Six10's sheer, thinning properties make it "thinner" as it's worked.  It can be easily tooled into a fillet or used to wet out light to moderate reinforcing fabrics, like fiberglass.

The hardener provides a long open time but has fast thru-cure.  Remaining workable in the static mixer for 42 minutes, Six10 is practical for long or complicated assemblies.  The epoxy will cure at temperatures as low as 50ºF.  At room temperature, it cures to a solid in 5-6 hours and is ready to withstand heavy loads in just 24 hours.  Completely compatible with all other WEST SYSTEM products, Six10 can be used on top of or underneath any 105 Resin-based epoxy, whether cured or uncured.

A cartridge of Six10 holds 190 ml of resin and hardener, the equivalent of a linear epoxy bead more than 40' long when dispensed through the static mixer's 1/8" opening.  The mixer's tip has stepped gradations, allowing the user to nip the end for a 3/16" or 1/4" thick bead.

Six10 Introduction

Delivery info

Where products are in stock you should expect delivery within 3 working days. For next day delivery the cut-off time is 2pm. Orders received after 2pm will be despatched the following day for delivery the day after.

Delivery for Chart Art is 10 working days.

Returns during the Christmas period. We will accept the return of any product (excluding custom made products such as rope, rigging, sails or canvas work, or audio or video recordings or computer software which has been unsealed by you) up to January 31 2015. Please download our returns form (PDF).

If goods are not in stock and delivery is going to be longer than 30 days Storrar Marine Ltd will contact you to discuss options. Storrar Marine Ltd will not be liable for any loss or damage suffered by you through any reasonable or unavoidable delay in delivery.

We charge strictly at cost for delivery, however for orders over £100, delivery is free to UK addresses.* Free delivery will be applied to the cart at the checkout payment stage (if applicable).

If delivery is to the UK mainland, excluding the Scottish Highlands, charges are
<1kg £4.99
>1 <2 £6.99
>2 <10 £7.99
>10 <20 £9.99
>20 <30 £15.99
>30 <40 £39.99
Oversize items £59.99
Flares £18.99

*Free UK delivery is restricted to England, Wales and Lowland Scotland. It does not include Northern Scotland, or Islands or Northern Ireland. Restricted to maximum 30kg and 1.5m in length, it does not apply to bulky products; dinghies, outboards, or hazardous products; liferafts, or pyrotechnics (Flares). Free delivery is for a single complete shipment of an order.

Extra charges apply for next day deliveries and Saturday deliveries, and deliveries to Highlands, Islands and Northern Ireland. If you are fortunate enough to be in the Channel Islands, please use Jersey or Guernsey as the country to get the ex-VAT figures.

Small, but valuable items such as Electronic Charts are charged at the £6.99 rate as we usually send by courier so they can be tracked. Rolled up Admiralty charts are £4.99, but Admiralty folios are packed flat and too large to go by post and are £6.99.

Delivery charges may be changed without notice. Any overcharge of delivery cost will be refunded.

We cannot predict the cost to ship hazardous materials outside of UK. If your purchase includes a gas inflating lifejacket we can send it overseas only by first removing the gas bottle. You will have to find a local source to replace this bottle for the lifejacket to function. We cannot send re-arm kits overseas.

We cannot send other hazardous goods including liferafts, paint and antifouling overseas without first getting a special delivery quotation. After all these hurdles we put up, please do not be alarmed - if you need a liferaft delivered to the Baltic, the Mediterranean, the Caribbean, simply contact us for a quote. You can be confident our delivered price will still be better than local sourcing.

For delivery outside the EC, you must observe and comply with all applicable regulations and legislation, including obtaining all necessary customs, import or other permits to purchase goods from our site. You will be responsible for payment of any import duties and taxes. The importation or exportation of certain types of goods to you may be prohibited by certain national laws. Storrar Marine Ltd make no representation and accept no liability in respect of the export or import of the goods you purchase. 

The majority of our deliveries need to be signed for, therefore we would recommend using a delivery address where somebody will be around to do this during normal working hours. ie your office or place of work.


Be the first to review this product

Write Your Own Review

You're reviewing: West System Six10 Epoxy Adhesive 190ml