Majoni Fender Replacement Valve Fvalve

Majoni fender inflation adaptors are ingeniously crafted in two parts to connect a car foot pump or bicycle pump securely to any Majoni Fender Inflation Valve via a reliable male/female thread.

Features of Majoni Fenders:

• Unique Brass Valve: Majoni fenders feature a specially designed brass valve that facilitates easy inflation, deflation, and reinflation.
• Optimal Inflation Method: For best results, Majoni recommends inflating their fenders by pushing air pressure from a compressor with a flat head against the valve.
• Alternative Inflation: It is also possible to inflate the fenders using a bicycle or foot pump with the unique brass adaptor.
• Warning: Do not use a needle type adaptor, as it will damage the valve.

Recommended Inflation and Maintenance:

• Optimum Inflation Pressure: 0.2 bar. At this pressure, you should be able to visibly press in the fender wall with the flat of your hand.
• Temperature Consideration: The internal pressure of the fenders will fluctuate with ambient temperature changes, so it is essential to regularly check the inflation.

Deflating a Majoni Fender:

To deflate a Majoni fender, gently push a pen or biro the minimum distance into the valve to release the air.

Replacing a Damaged Majoni Valve:

1. Screw an M3 threaded bolt or machine screw into the valve.
2. Firmly grip the bolt head with a pair of pliers and pull the valve out of the fender wall.
3. Insert the new valve into the hole in the fender wall using the same method, applying hand pressure with the bolt and pliers.