Mercury 100 hour Maintenance Service Kit - 150 HP Four Stroke - 8M0094232
The Mercury 100-Hour Maintenance Service Kit 8M0094232 is designed specifically for the maintenance of 150 HP Four Stroke Mercury outboard engines. This kit includes all the necessary components to perform routine maintenance at the 100-hour service interval.
Components Typically Included in the 8M0094232 Kit:
- Engine Oil: Specifically formulated for Mercury 150 HP Four Stroke engines.
- Oil Filter: Essential for maintaining clean oil and optimal engine performance.
- Fuel Filter: Ensures that fuel delivered to the engine is free of contaminants.
- Spark Plugs: Necessary for efficient engine ignition and performance.
- Impeller: Part of the cooling system, helps in maintaining optimal engine temperature by circulating water.
- Gear Lube: For lubricating the lower unit gears.
- Drain Plug Seal: Ensures no leaks occur after oil changes.
- Miscellaneous Gaskets, O-rings, and Washers: Needed for various maintenance tasks to ensure proper sealing and functioning of replaced parts.
Performing the 100-Hour Maintenance:
- Change the Engine Oil: Drain the old oil, replace the oil filter, and refill with fresh oil.
- Replace the Oil Filter: Ensure the new filter is properly seated and secured.
- Replace the Fuel Filter: This will help maintain clean fuel flow to the engine.
- Replace Spark Plugs: Ensure each spark plug is properly gapped and installed.
- Inspect and Replace the Impeller: Check the water pump impeller for wear and replace if necessary.
- Change Gear Lube: Drain the old gear lube from the lower unit and refill with fresh gear lube.
- Inspect and Replace Gaskets and Seals: Ensure all seals and gaskets are intact and replace any that show signs of wear or damage.
Important Tips:
- Always refer to the engine’s service manual for specific instructions and torque specifications.
- Use only Mercury-approved parts and lubricants to ensure the best performance and longevity of your engine.
- Properly dispose of used oil, filters, and other materials in accordance with local environmental regulations.
Regular maintenance using the correct service kit helps ensure your outboard engine runs smoothly and efficiently, prolonging its life and maintaining its performance.
We despatch all orders within 24 hours. Orders placed weekdays before 4pm will be shipped the same day.
Call us and speak to an expert on 0191 4297309 - (Mon - Fri / 9am - 5pm).
Pickup available at Marine Chandlery: North Shields
Usually ready in 1 hour
Mercury 100 hour Maintenance Service Kit - 150 HP Four Stroke - 8M0094232
Marine Chandlery: North Shields
Unit G4 Narvik Way
Tyne Tunnel Trading Estate
North Shields NE29 7XJ
United Kingdom
The Mercury 100-Hour Maintenance Service Kit 8M0094232 is designed specifically for the maintenance of 150 HP Four Stroke Mercury outboard engines. This kit includes all the necessary components to perform routine maintenance at the 100-hour service interval.
Components Typically Included in the 8M0094232 Kit:
- Engine Oil: Specifically formulated for Mercury 150 HP Four Stroke engines.
- Oil Filter: Essential for maintaining clean oil and optimal engine performance.
- Fuel Filter: Ensures that fuel delivered to the engine is free of contaminants.
- Spark Plugs: Necessary for efficient engine ignition and performance.
- Impeller: Part of the cooling system, helps in maintaining optimal engine temperature by circulating water.
- Gear Lube: For lubricating the lower unit gears.
- Drain Plug Seal: Ensures no leaks occur after oil changes.
- Miscellaneous Gaskets, O-rings, and Washers: Needed for various maintenance tasks to ensure proper sealing and functioning of replaced parts.
Performing the 100-Hour Maintenance:
- Change the Engine Oil: Drain the old oil, replace the oil filter, and refill with fresh oil.
- Replace the Oil Filter: Ensure the new filter is properly seated and secured.
- Replace the Fuel Filter: This will help maintain clean fuel flow to the engine.
- Replace Spark Plugs: Ensure each spark plug is properly gapped and installed.
- Inspect and Replace the Impeller: Check the water pump impeller for wear and replace if necessary.
- Change Gear Lube: Drain the old gear lube from the lower unit and refill with fresh gear lube.
- Inspect and Replace Gaskets and Seals: Ensure all seals and gaskets are intact and replace any that show signs of wear or damage.
Important Tips:
- Always refer to the engine’s service manual for specific instructions and torque specifications.
- Use only Mercury-approved parts and lubricants to ensure the best performance and longevity of your engine.
- Properly dispose of used oil, filters, and other materials in accordance with local environmental regulations.
Regular maintenance using the correct service kit helps ensure your outboard engine runs smoothly and efficiently, prolonging its life and maintaining its performance.